Exceptional Blueshifted and Enhanced Aggregation‐Induced Emission of Conjugated Asymmetric Triazines and Their Applications in Superamplified Detection of Explosives

A novel conjugated asymmetric donor–acceptor (CADA) strategy for preventing the redshift in photoluminescence, as well as preserving the merits of donor–acceptor architectures, was proposed and demonstrated for two triazine derivatives, which showed highly efficient, narrow, and blueshifted ultraviolet light emission in solid films along with special aggregation‐induced emission behavior. A mechanism of aggregation‐induced locally excited‐state emission by suppressing the twisted intramolecular charge‐transfer emission for the spectacular optoelectronic phenomena of these CADA molecules was suggested on the basis of both experimental measurements and theoretical calculations. By taking advantage of this special CADA architecture, fluorescent probes based on aggregates of conjugated asymmetric triazines in THF/water for the detection of explosives show superamplified detection of picric acid with high quenching constants (>1.0×10⁷ M ^?1) and a low detection limit of 15 ppb.     

光谱法锌离子检测系统的研究

采取标准锌显色剂与锌发生显色反应，生成不溶于水的絮状络合物。用光谱仪测它的吸光度，研究其特征谱与吸光度的特点，建立其浓度与特征波长吸光度间的数学模型。本文所采用的显色剂主要与锌、铜、镉、镍四种离子发生络合反应。因此分别探索了四种离子高浓度以及低浓度时显色反应的吸光度，最终通过得到锌离子浓度与吸光度的关系式以及锌离子浓度与四波长下四种离子混合溶液显色后的吸光度的关系式，给出了锌离子的吸光度与总吸光度的关系式。显色反应能否满足分光光度法的要求，主要与显色剂的性质有关，同时显色反应的条件也至关重要。因为在显色反应过程中，主要是锌离子与锌显色剂发生络合反应形成络离子，进而形成絮状络合物。络离子一般比较稳定，但在水溶液中也存在着电离平衡，也就是说当显色条件发生变化时，既有可能形成络离子，也有可能发生络离子的分解，从而影响络合反应的程度。显色条件包括显色剂用量、pH值、反应温度、显色时间、待测溶液的盐度以及浊度等。重点研究待测溶液的盐度对锌离子浓度测量值的影响，并通过实验给出影响规律以及校正模型。     

IPDA激光雷达数据反演快速精确优化算法

研究了积分路径差分吸收(IPDA)激光雷达中采用洛伦兹线型代替伏格特线型对机载平台探测CO₂柱浓度精度的影响。建立仿真模型，讨论两种线型在数据反演中对温度和气压的敏感性，以及探测相对误差变化随飞行高度的变化。结果表明：伏格特和洛伦兹线型得到的吸收截面，温度和气压敏感性，相对随机误差分别为0.860%，-0.703%和0.224%，基本没有差别，但是洛伦兹线型可以有效地提高光谱参数计算效率。机载IPDA激光雷达采用洛伦兹线型可以快速高精度反演飞行路径上CO₂柱浓度，降低了对系统计算能力的要求，有助于实现在飞期间数据实时反演和分析，以及实施针对突发事件的飞行规划，同时也有助于进一步实现机载激光雷达系统的小型化和集成化。     

Conjugated polymer‐functionalized graphite oxide sheets thin films for enhanced photovoltaic properties of polymer solar cells

In this study, the maleimide‐thiophene copolymer‐functionalized graphite oxide sheets (PTM21‐GOS) and carbon nanotubes (PTM21‐CNT) were developed for polymer solar cell (PSC) applications. The grafting of PTM21‐OH onto the CNT and GO sheets was confirmed using FTIR spectroscopy. PTM21‐CNT and PTM21‐GOS exhibited excellent dispersal behavior in organic solvents. Better thermal stability was observed for PTM21‐CNT and PTM21‐GOS as compared with that for PTM21‐OH. In addition, the optical band gaps of PTM21‐GOS and PTM21‐CNT were lower than that of PTM21‐OH. We incorporated PTM21‐GOS and PTM21‐CNT individually into poly(3‐hexylthiophene) (P3HT)/[6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) blends for use as photoconversion layers of PSCs. Good distributional homogeneity was observed for PTM21‐GOS or PTM21‐CNT in the P3HT/PCBM blend film. The UV–vis absorption peaks of the blend films red‐shifted slightly upon increasing the content of PTM21‐GOS or PTM21‐CNT. The band gap energies and LUMO/HOMO energy levels of the P3HT/PTM21‐GOS and P3HT/PTM21‐CNT blend films were slightly lower than those of the P3HT film. The conjugated polymer‐functionalized PTM21‐GOS and PTM21‐CNT behaved as efficient electron acceptors and as charge‐transport assisters when incorporated into the photoactive layers of the PSCs. PV performance of the PSCs was enhanced after incorporating PTM21‐GOS or PTM21‐CNT in the P3HT/PCBM blend. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013